M5

FEATURES

  • M4 & M10 Bubbler only
  • M5 & M11 Bubbler and glass filler
  • Optional stainless steel cabinets
  • Optional internal filters
  • Robust construction
  • Reliable performance and simple to install

WATER RESERVOIR

A 1.5 litre tank is incorporated within the chilling chamber to meet peak use periods. The tank is fabricated from seamless hard drawn copper, tin plated for your safety.

  • M4/M5: 19 l.p.h. during peak periods. 
  • M10/M11:26 l.p.h. during peak periods.

REFRIGERATION

M4/M5 use 190 gms each of refrigerant R134A. M10/M11 use 127 gms each of refrigerant R22 , both are non-toxic, non-flammable and enviromentally friendly. The refrigerant flow is controlled by a capillary tube which has no moving parts. The system is fitted within the suction line to give maximum heat exchange efficiency.

WATER FLOW CONTROL

The bubbler is rated to supply 1.7 l.p.m at any mains water pressure between 140 and 700kPa. An automatic, self-regulating control is fitted to overcome the problem of varying mains pressure.

WATER CONNECTIONS

  • Water inlet - 1/2" female B.S.P
  • Drain - 40mm Female F.P.V.C. pipe

TEMPERATURE CONTROL

The thermostat is factory pre-set.

COMPRESSORS

  • M4/M5 Range - 1/5 h.p. capacity 339 watts.
  • M10/M11 Range - 1/4 h.p. capacity 370 watts.

CONDENSER

Copper tube and expanded aluminium fin.

ELECTRICAL

240 volts, 50Hz. A 2 metre house cable and 3 pin plug is supplied.

PERFORMANCE TO ARI 1010-94 STANDARD

  • Inlet water - 26.7°C
  • Outlet water - 10°C
  • Ambient Air - 32.2°C

WEIGHT - PACKED

  • M4/M5 - 32kg
  • M10/M11 - 34kg

DIMENSIONS

  • Width - 350mm
  • Depth - 350mm
  • Height - 1100mm

WARRANTY

  • Twelve months comprehensive coverage.
  • Five years for compressor replacement.