Products
FEATURES
- WM2 Bubbler only
- WM3 Bubbler & glass filler
- Optional stainless steel cabinet
- Durable steel cabinets
- Variable height for different applications
- Adjustable water flow
- Wall mounted to suit application
WATER RESERVOIR
A 0.5 litre tank is incorporated within the chilling chamber to meet peak use periods. The tank is fabricated from seamless hard drawn copper, tin plated for your safety. The chilling capacity is 8 l.p.h. during peak periods.
REFRIGERATION
The system uses 170gms of refrigerant R134A. It is non-toxic and non-flammable. The Refrigerant flow is controlled by capillary tube, there is no moving parts. The system is fitted within the suction line to give maximum heat exchange efficiency.
WATER FLOW CONTROL
The bubbler is rated to supply 1.71 l.p.m. at any mains pressure between 140 and 700 kPa. An automatic self-regulating control is fitted to overcome the problem of varying mains pressure.
WATER CONNECTIONS
Water inlet - 1/2" female B.S.P. Drain 40mm F.P.V.C. pipe.
TEMPERATURE CONTROL
The thermostat is factory pre-set.
COMPRESSOR
1/8 hp capacity, 90 watts. The compressor is hermetrically sealed for silent running.
CONDENSER
The condenser is of copper tube and expanded aluminium fin.
ELECTRICAL
240 volts, 50Hz. A 2 metre house cable and 3 pin plug are supplied. Full load current 1.06 amps.
PERFORMANCE TO ARI 1010-94 STANDARD
- Inlet water - 26.7°C
- Outlet water - 10°C
- Ambient air - 32.2°C
WEIGHT
- 31kg
WARRANTY
- Twelve months comprehensive coverage.
- Five years for compressor replacement.